Applying Our Switch Screen Protector

Here’s a simple step-by-step guide you can follow to apply our screen protector bubble-free and perfectly aligned.

Step 1: Prep the Space

• Wash your hands.

• Try to be in a dust-free environment.

• Lay the device flat on a clean surface.

Step 2: Clean the Screen

• Wipe with the included wet wipe to remove dust and smudges.

• Dry with the included microfibre cloth.

Step 3: Align the Protector

• Place the protector on the screen (without peeling backing) to check fit.

• Align it perfectly with the edges, camera, and buttons.

• Once you have the alignment figured out, you can simply peel off the backing and drop the screen protector straight onto the screen.

• Alternatively, peel off the backing and place one end of the protector against one edge of the screen first (to help guide alignment), then lower the rest of it down.

Step 5: Remove Bubbles

• Let it naturally settle — tempered glass will suction itself onto the screen.

• If small bubbles remain, gently push them out with a microfiber cloth or card wrapped in cloth.

• TIP: If a dust bubble forms, you can try to lift the protector slightly with a piece of tape, remove the dust with another piece of tape, and reapply.